Monessen Hearth Vent Free Insert DIS33G Product Specifications
Monessen Hearth Vent Free Insert DIS33G Product Specifications

Monessen Hearth Vent Free Insert DIS33G Product Specifications

Monessen hearth vent free insert product specification

Advertisement

PRODUCT SPECIFICATIONS
DIS33G Vent Free Insert
I N T E R I O R D I M E N S I O N S
Front opening width: 27"
Front opening height: 14-1/2"
Rear wall width: 21"
Firebox depth: 13"
T E C H N I C A L I N F O R M A T I O N
Max. BTU Input: 28,000 BTU/HR
Ignition System: Standing Pilot
Gas Type: Natural or LP
Controls: Thermostat or Millivolt
Clearance to Fireplace: Zero
CSA Design Certified
F I E L D I N S T A L L E D A C C E S S O R I E S
Louvers: Polished Brass
Black Small Face Plate (33" H x 43" W): Includes Brass Trim
Black Large Face Plate (36" H x 50" W): Includes Brass Trim
Volcanic Rock
Ceramic Fiber Cinders
Ambient Technologies
Remote Controls and Thermostats
HPBA
Hearth, Patio & Barbecue Association
MADE IN U.S.A.
A Brand of Monessen Hearth Systems Co.
149 Cleveland Drive, Paris, Kentucky 40361
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable
building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended
for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. © 2007 Monessen Hearth Systems Co.
www.monessenhearth.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vent Free Insert DIS33G and is the answer not in the manual?

Questions and answers

Table of Contents