Preview screen
Preview the image and adjust the focus/zoom.
The current image focus/zoom position is superimposed
when adjusting the focus/zoom.
For the details of each button, please refer to the Control
bar of the Plug-in free viewer (page 24).
Note
If you click the buttons in this tab, in order to adjust the
focus/zoom easily, the settings below are temporarily
changed:
– Privacy Masking and Cropping are deactivated.
– The current image focus/zoom position is
superimposed.
– The alarm of Motion detection is deactivated.
Adjusting the zoom
Click the –500, –100, –10, +10, +100 or +500 buttons to
adjust the zoom position accordingly.
Note
The focus is moved slightly after adjusting; adjust the
focus again, as necessary.
Adjusting the focus
Click Start button in Easy Focus to set the focus to the
optimum position.
Notes
• The most suitable focus may not be available
depending on imaging conditions. If so, click the –20,
–5, –1, +1, +5, +20 buttons to adjust the focus.
• When SolidPTZ is set to On, Easy Focus may not
work properly. In this case, set SolidPTZ to Off.