Synchronous Mode - Fujitsu SK-91465X-100PMC User Manual

4.2 Synchronous Mode

In order to program the Flash-ROM synchronously special third-party soft- and hardware has
to be used, e.g. GALEP-4 from www.conitec.de. This tool is not available for free.
A dedicated Flash programming socket (J4) is provided on the evaluation-board for direct
connection to this programmer.
UG-910056-11
SK-91465X-100PMC User Guide
Chapter 4 Programming the internal Flash
n/c 1 2 n/c
MD0 3 4 MD2
RST 5 6 SIN4
SOT4 7 8 SCK4
VCC 9 10 GND
Figure 4-1: J4 Flash programming socket
- 26 - © Fujitsu Microelectronics Europe GmbH