Assembly; Features - Craftsman 315.114832 Operator's Manual

1/4 in., 19.2 volt impact driver
Hide thumbs Also See for 315.114832:
Table of Contents

Advertisement

KNOW YOUR IMPACT DRIVER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAGE
Bits provided with the impact driver can be placed in the
storage area, located on the base of the tool.
BLOWS PER MINUTE
This tool features an impact speed of 0-3,500 BPM (Blows
Per Minute). Blows Per Minute is the number of impacts
per minute.
CHARGER
The charger has a key-hole hanging feature for
convenient, space-saving storage. Screws should be
installed so that the center distance is 4-1/2 in.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
1/4 in. Impact Driver
Battery Pack (2)
Charger
Single-ended Bit (2)
Operator's Manual

FEATURES

COUPLER
Quickly and easily change bits without the need for tools.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your impact driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the switch trigger in the OFF (center lock) position helps
reduce the possibility of accidental starting when not in
use.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.

ASSEMBLY

WARNING:
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
9
If any parts are damaged or missing
Do not attempt to modify this tool
To prevent accidental starting that

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents