Sony HT-NT3 Operating Instructions Manual page 15

1
Turn on BLUETOOTH function on
the BLUETOOTH receiver.
2
Set [Bluetooth Mode] to
[Transmitter] in [Bluetooth
Settings] (page 25).
3
Press / to select [OK].
4
Press / to select the
BLUETOOTH receiver's name from
[Device List] in [Bluetooth
Settings] (page 25), then press
When the BLUETOOTH connection
is established, the blue LED
indicator lights up.
Note
If you cannot find your BLUETOOTH
receiver's name in the list, select
[Scan].
5
Start playback the source via this
system.
The sound is output from the
BLUETOOTH receiver.
6
Adjust the volume.
Adjust the volume of the
BLUETOOTH receiver.
When connected to a BLUETOOTH
receiver, volume level of the Bar
Speaker cannot be controlled.
Volume buttons on the Bar Speaker
and remote control only works for
the BLUETOOTH receiver.
Note

You can register up to 9 BLUETOOTH
receivers. If the 10th BLUETOOTH receiver
is registered, the least recently connected
BLUETOOTH receiver will be replaced by
the new one.

The system can display up to 15 detected
BLUETOOTH receivers in the [Device List].

You cannot change the sound effects or
settings in Options menu during sound
transmitting.

Some contents cannot be output due to
content protection.

The audio output from the BLUETOOTH
receiver may be delayed from that on the
system because of the characteristics of
the BLUETOOTH wireless technology.

No sound is output from system's
speakers and HDMI OUT (ARC) jack when
BLUETOOTH receiver is successfully
connected to the system.

[Screen mirroring] input, [Bluetooth
Audio] input and Home Theatre Control
function are disabled when the system is
in transmitter mode.
Tip
.

Once the system and BLUETOOTH
receiver are connected, you can control
playback by using playback operation
buttons on the BLUETOOTH receiver.

You can connect this system to the most
recently connected BLUETOOTH receiver
by pressing RX/TX
select [Transmitter]. Then, start playback
the source on the system.
To disconnect the BLUETOOTH
receiver
Perform any of the following items.
 Disable the BLUETOOTH function on
BLUETOOTH receiver.
 Set [Bluetooth Mode] to [Receiver] or
[Off] (page 25).
 Turn off the system or the BLUETOOTH
receiver.
 Perform the One-touch function (NFC).
To delete a registered
BLUETOOTH receiver
1
Select [Device List] in [Bluetooth
Settings] (page 25).
A list of paired and detected
BLUETOOTH receivers appears.
2 Press / to select the device, then
press OPTIONS.
3 Press / to select [Remove], then
press .
4 Press / to select [OK], then press
.
repeatedly to
15
US