Table of Contents
Advertisement
Display assembly
NOTE:
The display assembly is spared as a whole assembly and also is spared as subcomponents.
Description
Display assembly (11.6 in [29.5 cm], AntiGlare, SVA, LED TouchScreen)
Display assembly subcomponents
Description
Display bezel (includes bezel, touch glass, touch control board, and magnets for hibernation and 360)
Display cable
Display back cover
Display hinge
Display hinge covers (includes top and bottom covers)
Display panel (includes display screw mylar covers and rubber gaskets)
Proximity sensor board
Webcam (includes microphone rubber gaskets)
WLAN antenna
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
To remove the display assembly:
1.
Release the WWAN wireless antennas from the clips (1) built into the base enclosure.
2.
Release the WLAN wireless antenna cable from the clip (2) built into the base enclosure.
3.
Disconnect the webcam cable (3) from the system board.
Bottom cover on page
Battery on page
34).
23).
Component replacement procedures
Spare part number
794294-001
Spare part number
794290-001
761350-001
820512-001
794308-001
829866-001
794295-001
788218-001
794303-001
794285-001
41
Advertisement
Table of Contents
