Working With Cables - IBM eServer 380 xSeries Installation Manual

Working with cables

Refer to the following illustration for the location of the input and output connectors on
your server.
Notes:
1. The illustrations in this document might differ slightly from your hardware.
2. To install your server in a rack, refer to the Rack Installation Instructions for
3. If you install your server in a rack, ensure that you route all cables through the
12
xSeries 380: Installation Guide
complete installation and removal instructions.
cable-management assembly on the rack. Refer to the Rack Installation
Instructions for complete instructions.
Serial ports A - top
B - bottom
USB ports
Power cord connector
Expansion slot
Keyboard port
Auxiliary-device (pointing device) port
Power cord connector
Hot-plug PCI status lights
Power cord connector
Parallel port
External SCSI connector
ICMB ports # 2 - top
# 1 - bottom
Video port
Ethernet port