Advertisement
Quick Links
Download this manual
See also:
Manual
Contact information is located on the Customer Care page of the website.
ANALOG
Date Models
Date Setting
1. Pull the crown out to position 2.
2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day.
The direction that moves the date varies on different watch models.
Time Setting
1. Pull crown out to position 3.
2. Turn counter-clockwise to advance the time and continue until the day changes to the
present day.
3. Set to the correct time.
4. Push crown back to position 1.
Retrograde with Date Sweep VD86A / VD85J
Time and Date Setting
1. Pull crown out to position 3 and rotate clockwise to set day of week. Hand in upper
left indicates weekday and will automatically reset to "M" at the end of the week.
2. Keeping crown in position 3, rotate hands to set the time (make sure am/pm is
set correctly).
3. Push crown back to position 1.
4. Pull crown out to position 2 and rotate counter-clockwise to set date.
5. Push crown back to position 1.
AUTOMATIC
Automatic Winding Movement
A timepiece fitted with an automatic winding movement obtains the power to wind itself by the movement of your wrist, there is no battery.
Therefore, not wearing the timepiece for several consecutive days could exhaust the power reserve. If your watch stops, it is recommended that
you manually wind the movement by rotating the crown clockwise to achieve the necessary power reserve.
It is important your timepiece is adjusted to match the size of your wrist. A loose fit may result in a loss in capacity of the timepiece to wind
itself. When fully wound, your timepiece has a power reserve of approximately 38 hours.
Automatic TY2723 / TY2542
1. To start time-keeping, rotate the crown clockwise 15-20 times in
position 1.
2. Pull crown out to position 2 and rotate clockwise to set time. Push
crown back to position 1.
For older movements, please contact Customer Care in your market.
WEEKDAY
SECOND HAND
WEEKDAY
SECOND HAND
1 2
SECONDS
TY2723
- 1 -
ENGLISH
DATE
1 2 3
DATE
1 2 3
VD86A
DATE
1 2 3
VD85J
POWER
RESERVE
1 2
SECONDS
TY2542
revised 8 / 13
Advertisement
Related Manuals for Fossil Retrograde with Date Sweep VD86A
Summary of Contents for Fossil Retrograde with Date Sweep VD86A
- Page 1 2. Turn counter-clockwise to advance the time and continue until the day changes to the present day. 3. Set to the correct time. 4. Push crown back to position 1. Retrograde with Date Sweep VD86A / VD85J DATE WEEKDAY Time and Date Setting 1.
-
Page 2: Analog - Digital
Automatic 2876 MONTH 1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1. 2. Pull crown out to position 2 and rotate clockwise to set hour and minute hands. 24-hour hand DATE moves with hour and minute hands. Use 24-hour hand to set correct am/pm time. Push crown WEEKDAY back to position 1. - Page 3 Ana-Digi QFL133 Normal Time Display 1. Press A to change mode. Mode sequence is normal time display, alarm, chronograph, and time/calendar setting. 2. Press B for EL. 3. Press C to toggle 12/24-hour time. NOTE: In any setting mode, if no pusher is operated for 2 minutes, all changes will be saved and the setting will automatically return to normal time display.
- Page 4 World Time Module (Analog-Digital and Digital) Normal Time Display 1. Press pusher B for EL. 2. Press pusher C for hourly chime on/off. 3. Press pusher D for DST on/off for the selected city. 4. In any mode or setting, if no pusher is operated for 60 seconds, setting will be returned to normal time display. Time and Calendar Mode 1.
-
Page 5: Mul Tifunction
MUL TIFUNCTION Multi-Time Zone 505.24H Time / Calendar Setting 1. Pull RED crown B (at 4:00 position) out to position 2. 2. Turn crown clockwise to set to previous day’s date. 3. Pull crown out to position 3. 4. Turn crown counter-clockwise until date changes to today’s date; set correct a.m. or p.m. time. 5. - Page 6 Chronograph Stopwatch VD54 (with date - VD53) 24-HOUR CHRONOGRAPH HAND Time and Date Setting MINUTE HAND 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 1 2 3 2. Pull crown out to position 2. CHRONOGRAPH 3.
- Page 7 Chronograph Stopwatch OS10 (no date - OS30) CHRONOGRAPH MINUTE HAND Time Setting 1. Pull crown out to position 3. CHRONOGRAPH 2. Turn crown to set the desired time. HOUR HAND 1 2 3 3. Return crown to position 1. SECOND HAND Date Setting CHRONOGRAPH 1.
- Page 8 Multifunction VX3J / 6P29 / 6P79 / VX3NE Date Setting 1. Pull crown out to position 2. 1 2 3 2. Turn clockwise to advance the date hand. 3. Push crown back to position 1. DATE 24-HOUR VX3J / 6P29 Day and Time Setting 1.
-
Page 9: Chronograph Second Hand
Chronograph VD51B CHRONOGRAPH Time and Date Setting SECOND HAND DATE 1. Before setting the time, make sure the chronograph second and minute hands are at the 12:00 position and the chronograph is not running. See Chronograph Operation instructions below. 1 2 3 2. - Page 10 DIGITAL Digital MLL-004 Normal Time Display 1. Press A to display month/date for 3 seconds. 2. Press A twice (or once if date is displayed) to display seconds. Press A again to return to Normal Time Display. Time and Date Setting 1.
- Page 11 Digital MLG-017 Normal Time Display 1. Press A to change mode. Mode sequence is normal time, alarm, time zone 2, timer, and chronograph. 2. Press B for EL. NOTE: At any point in any setting mode, press D to exit setting mode. NOTE: In any setting mode, if no pusher is operated for 2 minutes, all changes will be saved and the setting will automatically return to display mode.
- Page 12 Digital BJ2635 Normal Time Display 1. Press A to change mode. Mode sequence is normal time, world time, alarm, chronograph, recall mode, and timer. 2. Press B for EL. 3. Press C to toggle chime on/off. 4. Press D to toggle DST on/off. NOTE: In any mode, if no pusher/button is operated for 60 seconds, the setting will automatically return to normal time display.
- Page 13 Ten Half Digit Digital FL145 / FL186 Normal Time Display 1. Press A to change mode. 2. Press B for EL. 3. Press C to toggle 12/24 hour format. 4. Press D to stop alarm sound. Time/Calendar Setting 1. From normal time display, press A three times to enter setting mode. Seconds will begin flashing. 2.
- Page 14 LED QFL558FA Hour/Minute Display 1. Press A to toggle display on/off. NOTE: Hour/Minute Display is the default display when turning the display on. 2. Press B to toggle hour/minute display and seconds display. Seconds Display Press A or B to return to hour/minute display. Time Setting 1.
- Page 15 MISCELLANEOUS Water Resistance Water-Related Use Caseback Depth Marking Washing Shower, Swimming, Snorkeling Scuba Diving Hands Bathing — — — 3 Bar, 3 ATM 30 Meters 5 Bar, 5 ATM 50 Meters 10 Bar, 10 ATM 100 Meters 20 Bar, 20 ATM 200 Meters 30 Bar, 30 ATM...