Specifications - Honda GC160 Service Manual

GC160
GC190 • GS190
1. SPECIFICATIONS.................................. 1-1 2. PERFORMANCE CURVES......................1-2

1. SPECIFICATIONS

Model
Type
Displacement
Bore x stroke
Net power * (in accordance with
SAE J1349)
Max. net torque * (in accordance
with SAE J1349)
Compression ratio
Fuel consumption
Cooling system
Ignition system
Ignition timing
Spark plug (NGK)
Carburetor
Governor
Lubrication system
Oil capacity
Recommended operating
ambient temperature
Starting system
Stopping system
Fuel used
Fuel tank capacity
PTO shaft rotation
* The power rating of the engine indicated in this document is the net power output tested on a production engine for
the engine model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max. net
torque). Mass production engines may vary from this value. Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including the operating speed of the engine in application,
environmental conditions, maintenance, and other variables.
gc160_gcaha_3599750_3721672
GC160LA
4-stroke, overhead camshaft single cylinder
160 cc (9.8 cu-in)
64 x 50 mm (2.5 x 2.0 in)
3.4 kW (4.6 hp) at 3,600 rpm
9.4 N•m (6.9 lbf •ft) at 2,500 rpm
1.5 /hr at 3,600 rpm
0.58  (0.61 US qt)
-15 ~ 40°C (5 ~ 104°F)
Unleaded gasoline with a pump octane rating of 86 or higher
Counterclockwise (from PTO shaft side)
1. SPECIFICATIONS
GC190LA
187 cc (11.4 cu-in)
69 x 50 mm (2.71 x 1.97 in)
3.9 kW (5.2 hp) at 3,600 rpm
11.2 N•m (8.3 lbf•ft) at 2,500 rpm
8.5 : 1
1.6 /hr at 3,600 rpm
Forced-air
Transistorized magneto ignition
20° B.T.D.C.
BPR6ES (NGK brand)
Horizontal type, butterfly valve
Centrifugal mechanical governor
Splash
Recoil starter
Ignition primary circuit ground
1.8  (1.9 US qt)
GS190LA
0.55  (0.58 US qt)
-5 ~ 40°C (23 ~ 104°F)