Electrical Requirement (U.K only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and conve-
nience. A 13-amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating
of 13-amp and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover, the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse
should be removed and the plug cut off and disposed of safely. There is a danger of se-
vere electrical shock if the cut off plug is inserted into any 13-amp socket.
How to replace the fuse
The location of the fuse differs according to
the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow
the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver and
replace the fuse and close or attach the
Parts Names and Handling Instructions
Wash all the detachable parts before using the appliance for the first time or when you have not
used it for a while. (P. GB18)
The tip of the handle can be used to remove
pulp from juice spout or pulp spout.
Safety lock pin (Upper
motor housing side)
(Release finger to stop the juicer.)
ingredients are jammed.