[L]
Set this between –6 dB and 0 dB
0 dB
in 1 dB increments.
[R]
Set this between –6 dB and 0 dB
0 dB
in 1 dB increments.
[CENTER]
Set this between –6 dB and +6 dB
0 dB
in 1 dB increments.
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
[SUBWOOFER]
Set this between –6 dB and +6 dB
0 dB
in 1 dB increments.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
[L]
Set this between –6 dB and +6 dB in
0 dB
1 dB increments.
[R]
Set this between –6 dB and +6 dB in
0 dB
1 dB increments.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu appears.