Mixtrax Settings - Pioneer DEH-X8750BT Owner's Manual

MIXTRAX settings

Menu Item
SHORT PLAYBACK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [Random],
[OFF]
FLASH AREA
[Key & Display], [KEY SIDE], [OFF]
Flashing Color
[Sound Level Mode Color 1] to
[Sound Level Mode Color 6]
[Low Pass Mode Color 1] to [Low
Pass Mode Color 6]
[Flashing Color Random]
[Sound Level Mode Random]
[Low Pass Mode Random]
DISP EFFECT
[MIXTRAX 1], [MIXTRAX 2], [OFF]
CUT IN EFFECT
[ON], [OFF]
MIX Settings
[MIX Fixed], [LOOP EFFECT],
[Flanger EFFECT], [Echo EFFECT],
[Crossfade EFFECT], [Crush EFFECT]
Description
Select the length of the playback time.
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 16) is used as the
display color.
Change the illumination effect according to
the sound and bass level.
The flash pattern changes according to the
sound level.
The flash pattern changes according to the
bass level.
The flash pattern changes randomly according
to the sound level mode and low pass mode.
The flash pattern changes randomly according
to the sound level mode.
The flash pattern changes randomly according
to the low pass mode.
Set the MIXTRAX special effects on/off.
Turn the MIXTRAX sound effects on/off while
manually changing the tracks.
Set fixed sounds or sound effects for the
MIXTRAX special effects.
[Flanger EFFECT], [Crossfade EFFECT] and
[Crush EFFECT] are not available when;
• [iPod] is selected as the source.
• The FLAC file is played back.
17
En