Assembly; Operation - Craftsman 315.115060 Operator's Manual

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Sander/Polisher
Side Handle
Rubber Disc
Polishing Bonnet
Spanner Wrench
Spanner Nut
Operator's Manual
:
WARNING
If any parts are damaged or missing
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
:
WARNING
Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
:
WARNING
Do not allow familiarity with tools
to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
:
WARNING
Always wear safety goggles or safety
glasses with side shields when operating power
tools. Failure to do so could result in objects being
thrown into your eyes resulting in possible serious
injury.
WARNING:
Do not wear loose clothing or jewelry
when operating this tool. They could get caught in
moving parts causing serious injury. Keep head away
from sander/polisher and sanding or polishing area.
Hair could be drawn into sander/polisher causing
serious injury.
FEATURES
WARNING:
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
INSTALLING THE SIDE HANDLE ASSEMBLY
See Figure 2.
Unplug the sander/polisher.

 Insert the handle assembly to the desired operating
position.
 Securely tighten by turning the handle assembly
clockwise.
NOTE: The side handle must always be used to prevent
loss of control and prevent injury.

OPERATION

WARNING:
hand and use the power of the sander/polisher to
tighten the rubber disc on the spindle. The sander/
polisher could slip in your hand, or cause an
accident resulting in serious personal injury.
WARNING:
or removing disks, adjusting settings, or when the
tool is not in use. Failure to unplug the tool may
result in accidental starting and serious personal
injury.
APPLICATIONS
You may use this tool for the purposes listed below:
 Sanding on wood and wood product surfaces
 Removing rust from and sanding steel surfaces
 Polishing and buffing painted surfaces
9
Do not connect to power supply until
TO
LOOSEN
TO
TIGHTEN
Do not hold the rubber disc with one
Always unplug the tool when installing
Fig. 2