AEG DVD 4511 CR Instruction Manual page 27

DESCRIPTION
Front Panel
1. POWER
– To switch standby modes.
2. STANDBY INDICATOR
3. DISPLAY
4. DISC TRAY
5. OPEN/CLOSE
– To open or close the disc tray.
6. SKIP
– Press to skip to the previous chapter/track.
7. SKIP
– Press to skip to the next chapter/track.
Rear Panel
1. DIGITAL OUT-COAXIAL
– Connect to audio equipment with digital-coaxial audio
input.
2. 5.1ch Analog audio out jacks.
– Connect to an amplifier with 5.1 ch analog
input jacks.
3. S-VIDEO OUT
– Connect to a TV with SVHS video input.
CAUTION: Do not touch the inner pins of the jacks or the rear panel. Electrostatic discharge may cause permanent
damage the unit.
8. STOP
– To stop playing the disc.
9. PLAY/PAUSE
– To start disc playback.
– To interrupt disc playback.
10. REMOTE SENSOR
11. Memory Card insert slot (COMPACT FLASH, MEMORY
STICK, SMART MEDIA CARD, SECURE DIGITAL
CARD, MULTIMEDIA MEMORY CARD)
4. VIDEO OUT
– Connect to a TV with video input.
5. SCART OUT
– Connect to a TV with SCART input.
6. AC POWER CORD
– Connect to a standard AC outlet.
27