Sharp SL-C1000 Quick Start Manual page 26

///TRIsoft OHG
Now it is nearly done, the "Backup/Restore" dialog should be visible:
The upper selection handles "Backup", the lower "Restore". Therefore, set the blue
sphere in front of the second line. The frame below selects the source of the backup
(CompactFlash, SD or in case for the SL-C3000 / 3100 also the HD).
Next choose the backup set to be restored in the right dropdown box.
Push the middle button at the bottom, when the desired backup can be seen in the
selection to the right. Another dialog appears and asks for confirmation (Yes, you are
sure):
Click the left button and the time of Kanji on the Zaurus will be over for the time being.
While restoring the backup, the "CG-Silicon" screen appears for a moment, then a
progress bar, which hopefully will reach 100%.
Afterwards the Zaurus restarts and it is done!
Page 26
SL-C1000/3000/3100 Quickstart
SHARP SL-C1000/3000/3100