Use Philips Easylink - Philips BDP2385 User Manual

message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press
remote control.
3
Wait until the media content from the
source device is displayed on your TV, then
choose the media to start play.
» Audio or video is streamed to your TV
through this player.
Note
•
This player can store up to 10 Miracast devices for
pair-up, and can only connect a single Miracast certified
device at a time.
•
During Miracast connection, Wi-Fi connection on this
player is temporarily suspended.
•
To avoid interference from Bluetooth transmission, turn
off Bluetooth on your Miracast device.
•
During Miracast streaming, video stuttering or audio
dropouts may occur, depending on your environment
(video streaming is up to 720p).

Use Philips EasyLink

This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
2
Press .
3
Select [Setup]> [EasyLink].
4
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
EN
8
One Touch Play
When a video disc is in the disc compartment,
on the
press
then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
to wake up the TV from standby, and