LG 19LE5300 Owner's Manual page 10

PREPARATION
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C, 42/47/55LE530C)
INSTALLATION
10
Downloaded From TV-Manual.com Manuals
Image shown may differ from your TV.
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV. At this
time, tighten the screws that hold the
STAND BODY on.
STAND BODY
STAND BASE
M4 x 22 (32LE5300)
M4 x 20
26LE5300,
M4 x 24 (37/42LE5300, 42LE530C)
26LE5500
M4 x 26 (47/55LE5300, 47/55LE530C)
3
Assemble the TV as shown.
Assemble the part of the STAND REAR
4
COVER with the TV.
STAND REAR
COVER
5
Install the 4 screws into the holes shown.
or
(For 42/47/55LE530C)
Tighten the two of these four
x 2
x 2
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).
M4 x 14
M4 x 16
Other models
26LE5300,
26LE5500
DETACHMENT
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the STAND REAR COVER from TV.
4
Detach the stand from TV.
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.