Advertisement
DESCRIPTION
• Hydrolock™ quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, and
all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA
for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
2-7/8"
(73mm)
2-7/8"
(73mm)
HANDLE BASE
2-7/16" (62mm)
DIAMETER
HOT
INLET
Rev. 3/11
SPOUT BASE DIA.
2-1/2" (64mm)
Connect
Assembly
8" (203mm) - 16"(406mm)
CENTERS
CRITICAL DIMENSIONS
S p e c i f i c a t i o n s
Two-Handle Widespread Lavatory
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
7"
(178mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
Quick
Hose
COLD
INLET
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
KINGSLEY™
Faucet
Models: T6125 series
Valve: 9000, 69000
4-7/16"
(113mm)
5-1/16"
(129mm)
www.moen.com
1-3/8"
(35mm)
Advertisement
Table of Contents
Need help?
Do you have a question about the KINGSLEY T6125 Series and is the answer not in the manual?
Questions and answers
How to stop leaky faucet for Kingsley collection T 6125
To fix a leaky Moen Kingsley T6125 Series faucet:
1. Identify the leak location (handle or spout).
2. Shut off the water supply.
3. Remove the handle using the appropriate tool.
4. Replace the 1224 cartridge, which is the internal valve controlling water flow.
5. Reassemble the faucet.
6. Turn the water supply back on and check for leaks.
Moen provides replacement parts free of charge under warranty if the leak is due to a defect in material or workmanship.
This answer is automatically generated