RCA CRCU500 User Manual page 14

1
Turn the VCR On and Off.
1. I'ress VCR1 or VCR2*LD to
set the remote
to control the VCR. (Most RCA, GE and
ProScan models will
only turn on when
pressing VCR not POWER).
2. Press POWER to turn the VCR on or off.
Watch a tape in your VCR.
1.
Turn on the VCR.
2. Insert a tape in the VCR.
3. Press PLAY
to start the tape.
4. Press
STOP when you are finished.
5. I'ress REW
to
rewind the tape.
6. Press PAUSE to pause the tape.
PLAY
P
STOP
m
REW
4
PAUSE
m
Record one channel and watch another.
1.
Press VCR1
or
VCR2"LD to set the remote
to control the VCR.
2.
Tune the VCR to the channel you want to
record.
CHAN
I@ 2@ 3@
~@ 5@ 6@
7@ 8@ ge
~@
CHAN
3. Press REC
to
start recording.
4.
Press TV~CR.
5. Press TV to set the remote to control the TV.
6. Press CHANNEL UP or DOWN
to
change channels on the TV.
7. To see the channel you are recording,
tune the TV to channel 3 or 4 (same as CH3/4
switch on the VCR). Tune to 90, 91, or 92 for
some RCA, C,E or ProScan products.
14
REC
m
TV. VCR
@
GHAN
A
CHAN