Bosch SHI 4302 Troubleshooting Tips page 24

Page D-7
SHU/SHI/SHV Dishwasher Troubleshooting Chart
The customer hot water supply should meet or exceed the minimum requirements
NOTE:
below for the dishwasher to operate efficiently.
requirements should be reinstalled according to local codes.
20-60 psi (1.4 - 4.1 bars) water pressure
•
o
140 F (60
•
minimum 3/8" (9.5 mm) flexible stainless steel or copper tanking inlet line
•
ELECTRICAL SHOCK HAZARD (120 VAC)
TURN OFF ELECTRICAL POWER AT THE CIRCUIT BREAKER OR FUSE BOX BEFORE
•
DISASSEMBLING OR REPAIRING THE DISHWASHER.
MAKE SURE THE DISHWASHER IS ELECTRICALLY GROUNDED.
•
USE COPPER CONDUCTORS ONLY FOR ALL WIRING OR REWIRING. FAILURE TO
•
FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
st
1 Edition/Revision 0-A
o
C) water temperature (recommended)
▲ ▲ ▲ ▲
WARNING!
Installations not meeting these
Tuesday, May 11, 1999
B