Adjustments; Preparations Before Adjustment; List Of Service Tools - Sony DSC-F505 Service Manual

5-1. ADJUSTMENTS

1-1.

PREPARATIONS BEFORE ADJUSTMENT

1-1-1. List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2 ND filter 0.4
ND filter 0.1
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-5
(Note 1)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 CPC-9 jig (Note 2)
J-9 Mini pattern box
J-10 Extension cable (39P, 0.3mm)
J-11 Personal computer with Windows95/98 installed
J-12 Picture Gear Ver.3.2 Lite
J-13 Extension cable (33, 39P, 0.3mm)
J-14 Back ground paper
Note 1: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), The pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11 J-12
• Color monitor
• Digital voltmeter
Name
J-3
J-8
J-13
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-806-A White balance check
J-6080-807-A White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
For connecting the adjustment remote commander
J-6082-393-C
For adjusting the LCD block
J-6082-353-B For adjusting the flange back
For extension between the CD-236 board (CN101) and
J-6082-448-A
the PS-427 board (CN251)
For checking the recorded picture
Picture management software
For checking the recorded picture
For extension between the SY-56 board (CN455, 456)
J-6082-447-A
and the HI-70 board (CN602, 603)
J-2501-130-A For adjusting the strobe
Note 2: The old CPC-9 jig (Parts code: J-6082-393-B) cannot be used,
because it cannot operate the adjustment remote commander.
J-4
J-9
J-14
Fig. 5-1-1.
5-3
Usage
J-5
J-10