Before Going To Register Mode - Royal 1000ML Instruction Manual

Before Going to Register Mode

Before Going to Register Mode
4 7
T he data you can save to an SD card is as follows:
• A ll PL U programming data
• A ll D epartment programming data
• A ll C lerk names (without passcodes)
• A ll H e ader, F ooter , and S cr olling M essage infor mation
I f you have previously saved data to an SD card or your PC , you can
load that data at any time. T o load data from an SD card, please follow
the instructions below, but at step 4 select Load from SD-Card instead.
T o load data from your PC via the R egisterL ink software, please
consult your R egisterL ink manual.
T o save your programming data to an SD card
Programming Save to SD-Card
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
Tend Total <Enter> key.
3 I f you are prompted for a M anager Passcode, type the passcode number
and then press the Check key. I f you did not program a M anager
Passcode, go to the next step.
4 Press the Arrow Down key to select Save to SD -C ard. Press the
Amount Tend Total <Enter> key.
5 A confirmation box will appear, use the Arrow keys to highlight OK
to confirm the save. I f you wish to go back, select CANCEL. O ne you
make a selection, press the Amount Tend Total <Enter> key to save
the data.
6 A pop-up box will appear and when the save is complete, you will
be brought back to the Programming menu.
7 W hen you are done programming, press the Main menu (on) key.
Your cash register offers many other features not covered in this chapter.
O ther options are covered in the chapter called Setting U p Your C ash
R egister Parameters, starting on page 51. We also provide examples to
help you learn how to use your cash register. For information about the
examples, see E E xamples on page 105.
A p l h a 1000ML User's Guide