Chap 4 Using Your Appliance; Symbols Used; Starting Up; Loading And Warming Up - Bartscher 109.750 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

INSTRUCTION MANUAL FOR DISHWASHERS

? ?

Push

corresponding to one of the

symbols shown.

? ?

The

warning

corresponding to one of the

symbols shown lights up.

the

button

light

1. Open the main water tap and engage the main

electrical switch.

2. Ensure the overflow cap is present.

3. Push the "on/off" button shown here. If present, the

related warning light will light up.

If the tank is empty, the appliance starts filling up once

switched on.

Once the tank is filled up, the warm up process is

started. If present, the related warning light goes off.

As tank and boiler reach the set temperature, the

warning light turns off.

To reduce the waiting time, it is possible to carry out

an empty cycle, 5-10 minutes after starting the

appliance.

Check for the presence of dishwashing detergent and

rinse agent. Information on the type of products and

quantities to be used (automatic or manual) is given in

chapter "Adjustments and settings".

Use an adequate rack; do not overload the rack or

place dishes on top of each other. Always remove

large food particles from dishes; do not load dishes

with dry food residues.

Place empty bowls upside down in rack. Load dishes

and similar items slanted on dedicated rack with

internal surface facing upwards. Accommodate all

silverware in the supplied basket with handles-down.

Wash only items approved for dishwashing.

It is advisable to wash the dishes immediately after

use, in order to prevent any residuals from hardening

and sticking on them.