Advertisement
Quick Links
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing
- Optional hot and cold temperature indicators available
- Hydrolock™ quick connect installation
- Includes metal pop-up waste assembly
- For use with S948 valve
- Designed to be installed through 3, 1-1/8" min. dia. holes
OPERATION
- Lever style handles
- Maximum handle rotation angle is 90˚ to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
- 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
- Third party certified to WaterSense, ® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Contains no more than 0.25% weighted average lead content
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
- ADA
for lever handles
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
3"
(76mm)
3-1/8"
(79mm)
ESCUTCHEON DIA.
2-1/4"
(57mm)
Rev. 3/11
8" (203mm) - 16" (406mm)
Centers
QUICK CONNECT
HOSE ASSEMBLY
CRITICAL DIMENSIONS
ESCUTCHEON DIA.
2-13/32"
(61mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
Spec i fi ca tions
SAVVY™
Two-Handle Widespread
Lavatory Faucet Trim
Models: TS497 series
Valve: S948
5"
(127mm)
4"
(102mm)
2-1/2"
(63mm)
1-3/8"
(35mm)
LIFT ROD
www.moen.com
Advertisement
