Qualcast GT2518 Instruction Manual page 7

320w grass trimmer
Table of Contents

Advertisement

Safety Information
Important - Please read these instructions fully before starting assembly
Precautionary Measures (continued)
Never use the appliance when any guard or housing element is damaged or not in place.
Ensure that the appliance will operate properly and perform its intended function.
Have any damaged or defective parts repaired or replaced an authorized repair agent.
Before use, check the mains cable for signs of damage, ageing or wear.
Do not use the appliance if the mains cable is damaged or defective.
If the mains cable is damaged or defective it must immediately be repaired by an authorised repair
agent to avoid any further hazard.
Never attempt to remove or replace any parts other than those specified in this manual.
General safety during usage
This tool is double insulated; therefore no earth wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Before using the appliance, check that your cutting path is free from sticks, stones, wire and any other
dangerous objects that may cause damage or be projected
Only use the appliance in the correct position, with the cutting line near the ground. Never switch the
appliance on in any other position.
Switch on the appliance only when hands and feet are at a safe distance from the cutting line.
Avoid any body contact with the cutting line while the appliance is running.
Do not work on steep slopes, be sure of your footing. Be aware that freshly cut grass is damp and
slippery.
Use only the appropriate of cutting line. Never use metal cutting line or fishing line.
After extending new cutting line, always return the appliance to its normal operating position before
switching on.
Take care to keep the mains cable away from the cutting line. Always be aware of the position of the
cable.
Customer Helpline 08456 400 800
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents