To Use An Electrical Power Source; Using A Battery Power Source; Ac Power Adapter - Sony RDP-M5iP User Manual

To use an electrical power source

1) Looking at the back of the System, plug the female end of the AC power adapter into
the DC IN 6V jack on the back of the System. See Figure 5 below.
DC IN 6V
Jack
Female
End
Figure 5 - AC Power Adapter
2) Plug the prong end of the AC power adapter into a 120 volt electrical power outlet. See
Figure 5 above.
The System is now configured to use an electrical power source.
If you are using an electrical power source with the System, ensure that the System is
unplugged from the electrical power outlet during a lightning storm to prevent damage to the
System.

Using a Battery Power Source

Using a battery power source is a procedure that shows you how to configure a battery power
source for the System. The procedure provides you with step-by-step instructions and
graphics to help you learn how to complete this task. Using a battery power source enables
you to configure the System to use it anywhere you want–providing portability for your music
system.
Prong
End
AC Power
Adapter
7