Adjustment - Sanyo VCC-HD5400P Service Manual

2. ADJUSTMENT

2-1. Table for Servicing Tools
Ref. No. Name
J-1 Pattern box
J-2 Calibration software
J-3
Chroma meter
J-4 Spare lump (pattern box)
J-5 Collimator
J-6 Spare lump (collimator)
J-7 Siemens star chart
1. Calibration software
Download the calibration software from the following URL.
http://www.overseas.sanyo.com/dcamera_service/
Place the DscCalDi.exe file, camapi32.dll file and
QrCodeInfo.dll file together into a folder of your choice.
2. Pattern box
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (VJ8-0192) adjust color temperature to 3100
± 20 K and luminosity to 900 ± 20 cd/m
dling the lump and its circumference are high temperature
during use and after power off for a while.
2-2. Setup
1. System requirements
Windows 2000 or XP or Vista
IBM® -compatible PC with pentium processor
USB port
2. Video monitor
Connect the video output to a video monitor with an input
impedance of 75 ohms.
2-3. Adjustment Items and Order
1. Timer Quartz Adjustment
2. Lens Adjustment (Infinity)
3. Lens Adjustment (1m)
4. AWB Adjustment
5. CMOS (CCD) White Point Defect Detect Adjustment
6. CMOS (CCD) Black Point And White Point Defect Detect
Adjustment In Lighted
7. Privacy Masking Adjustment
8. Gyro Offset Adjustment
9. Privacy Masking (Mechanism) Adjustment
Note: If the lens, CMOS and board and changing the part, it
is necessary to adjust again. Item 1-9 adjustments should be
carried out in sequence.
Number Part code
1 VJ8-0190
1
1 VJ8-0192
1 VJ8-0191
1 VJ8-0260
1 VJ8-0282
1
. Be careful of han-
2
-
11
2-4. Connecting the camera to the computer
1. It turns on power.
2. Connect the camera's USB terminal(CN102 CA-2board)
to the computer' USB connector.
3. Double-click on the DscCalDi.exe.
4. L5DG2 is selected with Model Code.
5. EX (VCC-HD5400P), US (VCC-HD5400) or C (VCC-
HD5400PC) is selected with Factry Mode.
6. PAL (VCC-HD5400P, VCC-HD5400PC) or NTSC (VCC-
HD5400) is selected with Video Mode.
2-4-1. Computer screen during adjustment
Calibration Upload
AWB
Firmware
Focus
QrCode
UV Matrix
Cal Mode
Initialize
OK
EVF VCO
Cal Data
LCD Type
OK
USB storage
Get VID Set Serial
PID
Set
Backrush pulse :
Get
2-4-2. Adjustment USB terminal (CN102)
CN102
-
LCD
R Bright
B Bright VCOMDC
RGB Offset Gain VCOMPP
Tint Phase
H AFC Test
Setting
Language
Set
Video Mode
Set Rev. Set
Factory Code
Set
Model_Code