Table of Contents
Advertisement
The following recommended accessories are currently available at Sears Retail Stores.
For fast smooth cuts in woods, masonite, plastics, hard composition
board and all plunge cutting. Keyhole blade shape permits cutting in
hard to reach areas.
For fast, smooth, deep cuts through thick wood, plastic, composition
board, and hardboard.
For rough cuts in wood.
High speed steel blade for cutting ferrous metals less than 1/8 in. thick
and for cutting tubing or pipe with a 1/8 in. thick wall section or less.
WARNING:
The use of attachments or accessories not listed above might be hazardous.
BLADE SELECTION
To obtain the best performance from your saw it is important to select a specific blade for the particular application and
type of material you wish to cut. By doing this you will get a smoother faster cut and prolong blade life. Replacement
blades for this saw are available from your nearest Sears Retail Store.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields,
available at Sears Retail Stores.
WARRANTY
FULL ONE YEAR WARRANTY ON
If this
Professional Cordless Reciprocating Saw fails due to a defect in material or workmanship within
one year from the date of purchase, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE OR
SEARS SERVICE CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
ACCESSORIES
BLADE TYPES
PROFESSIONAL CORDLESS RECIPROCATING SAW
SAVE THESE INSTRUCTIONS
14
LENGTH
TEETH
IN..
PER
IN..
6
6
12
6
12
6
4
24
Advertisement
Table of Contents
