Setting Lock; Setting Up The Administrator Password - Brother dcp-9020cdw Advanced User's Manual

Chapter 2

Setting Lock

Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Contact your
administrator or Brother customer service.
While the Setting Lock is On, you cannot
access the machine settings.
10
Setting up the administrator
2
password
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Security.
f
Press Security.
g
Press Setting Lock.
h
Enter a four-digit number for the
password using the keyboard on the
Touchscreen.
Press OK.
i
Enter the password again when the
Touchscreen shows Verify:.
Press OK.
j
Press .
.
2