Chapter Mark; Time Format - iLO DVDR05 Operation Manual

Time and Date Settings
1
Use the / and
date field to change.
2
To edit a field, press ENTER.
3
Use the / keys to increase or decrease the
value of the field.
4
To exit a field, press ENTER.
5
Press SETUP to exit the CLOCK SETTINGS
MENU.

Time Format

Select either 12HR (normal civilian time) or 24HR
(military time) time mode.
1
Use the / to select the Hour Mode field.
2
To edit a field, press ENTER.
3
Use the / keys to select an option.
4
Press SETUP to exit the CLOCK SETTINGS
MENU.
General - Recording
Quality
Auto CH mark
Recording Volume
Press RETURN to exit
Recording Quality Mode
Default setting: HQ (High Quality)
The Quality setting determines the quality of your
recordings as well as the maximum amount of video you
can record on a disc. Not surprisingly, the higher the
quality, the less video can be recorded.
Mode
HQ (High Quality)
SP (Standard Play)
LP (Long Play)
EP (Extended Play)
EP+ (Extended Play+)
SLP (Super-Long Play) Lower than VHS
/ keys to select a time or
Recording
SP(2 Hours)
5 min
100
Quality Max Time
Highest 1 HR
Excellent 2 HRs
Very Good 3 HRs
Better than VHS 4 HRs
Equal to VHS 7 HRs
8 Hrs
1
Use the / keys to select the QUALITY setting
you wish to use.
2
Press SETUP to exit the RECORDING MENU.

Chapter Mark

Default setting: 5 min
Control whether or not Chapter Markers are
automatically inserted during your recordings. You can
select the interval from 5, 10 or 15 minutes, or turn this
feature OFF.
1
Use the / keys to select an option.
2
Press SETUP to exit the RECORDING MENU.
Recording Audio Volume
Default setting: 100
Use this setting to adjust the volume of the audio for
your recordings. The default setting of 100 sends 100%
of the signal from your input to the recording. You can
decrease this value if you wish, all the way to 0 which
will result in no sound on the recording.
1
Use the / keys to decrease/increase the audio
volume.
2
Press SETUP to exit the RECORDING MENU.
General - Version
Displays various versions of the unit.
General - Restore
This action will restore
the factory defaults.
Are you sure you want
to continue ?
Selecting Yes will restore factory defaults to your unit.
A/V Output - Video
TV Shape
Standard Output
Scan Mode
Output
Press RETURN to exit
24
Setup Menu
Restore
!
Yes
No
Press RETURN to exit
Video
4:3 Pan Scan
NTSC
Interlace
S-Video