Moen Kingsley 6101 Series Specifications

DESCRIPTION

• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up type waste assembly

OPERATION

• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)

FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 Cartridge design
• Nonmetallic and stainless steel material

STANDARDS

• Third party certified to WaterSense,® ASME A112.18.1, ICC A117.1,
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
2"
(51mm)
Rev. 3/11
3/4" (19mm)
MOUNTING
NUT/WASHER
5-5/8"
(143mm)

CRITICAL DIMENSIONS

S p e c i f i c a t i o n s
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED THRU
MAX. DECK
THICKNESS
HOT
1/2" NPT
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
KINGSLEY™
Two Handle Lavatory Faucet
Models: 6101 series
Discontinued Model: 6101P
3 HOLES, 1" (25mm) MIN. DIA.
4" 2-7/16"
(102mm) (62mm)
COLD
1/2" NPT
LIFT ROD
3-1/4"
(82mm)
www.moen.com