IBM xSeries 150 User Reference Manual page 149

6. Connect to the xSeries 150 Appliance using the Terminal Services Client.
7. In the Terminal Services Client window, type
IBM-xxxxxxx
where xxxxxxx is the serial number located in the lower right corner of the bezel
and then click Connect.
8. Login to the xSeries appliance server.
Use the following case-sensitive user name and password to log onto terminal
services
User ID administrator
Password password
When you log on to Window Terminal Services, you can view the Web Hosting
Appliance graphical user interface (GUI) that is used to administer the appliance.
However, when you first log onto Terminal Services, the Setup and Configuration
Web page opens. This page provides links to documentation related to various
xSeries software products.
• To complete the client installation, add to the appliance any Web content or
applications required by your site.
• Refer to the Web page mentioned above, the IBM xSeries 150 Documentation CD
and the following Web site for assistance in using preinstalled software:
http:\\www.ibm.com\pc\netfinity
After the web page loads, click Solutions.
Chapter 6. Appliance Configuration Programs
137