Taking Pictures; Burst Mode; Time-Lapse Mode - Silvercrest SCAA 5.00 A1 User Manual And Service Information

SilverCrest SCAA 5.00 A1

Taking pictures


Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.

To switch to Photo mode (PHOTO), press the On/Off/Mode button [2] once.

Press the record button [9] to take a picture. While saving the status LED [3] goes green.

Burst mode


Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.

To switch to Burst mode (BURST), press the On/Off/Mode button [2] twice.

Press the record button [9] to take a series of 10 pictures. While saving the status LED
[3] goes green.

Time-lapse mode


Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.

To switch to Time-lapse mode (LAPSE), press the On/Off/Mode button [2] three times.

Press the record button [9] to start recording. During recording the status LEDs [3, 11
and 15] will flash red and the status LED [6] orange.

Press the record button [9] again to stop recording. The status LED [3] goes off.
100 - English