Back Panel Removal - HP C2858A Service Manual

Drafting plotters
Hide thumbs Also See for C2858A:
Table of Contents

Advertisement

BACK PANEL REMOVAL

To remove the back panel, perform the following procedure:
1. Remove the window assembly.
2. Using a TORX T-15 screwdriver, remove the 5 screws that attach the trailing cable
rear tray to the back panel.
3. Using a TORX T-15 screwdriver, remove the screws that attach the back panel to the
electronics enclosure assembly. The C2858A has three screws and the C2859A has
four screws. Lift the back panel clear of the plotter.
(C)C2858-42
(C)C2858-2
Download Free Service Manual and Resetter Printer at http://printer1.blogspot.com
Trailing Cable Rear Tray Screws (5)
Back Panel Screws
C2858A (3) C2859A (4)
Figure 6-16.
Removal and Replacement
6-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

C2859a

Table of Contents