Advertisement
HOGTUNES
Audio Solutions For The Great American Cruiser
Any audio system can be a distraction to the rider
Designed and Engineered in Canada For
and/or passenger. Please use caution when
The Great American Cruiser
playing your stereo, especially in traffic.
Limited-RM
Installation Manual
For Use On 2014+ (Non-CVO)
www.hogtunes.com
Liquid Cooled FLH Touring Bikes
Version 1.0
Advertisement
Table of Contents
Related Manuals for Hogtunes Limited-RM 362F-RM
Summary of Contents for Hogtunes Limited-RM 362F-RM
- Page 1 HOGTUNES Audio Solutions For The Great American Cruiser Any audio system can be a distraction to the rider Designed and Engineered in Canada For and/or passenger. Please use caution when The Great American Cruiser playing your stereo, especially in traffic.
- Page 2 Thank-you for choosing the Hogtunes Limited-RM Kit. Since positive word of mouth is the best way to grow our business, we want your new system to work as well as it was designed to. If you have any questions or concerns, we are here to help. Email info@hogtunes.com, or call us during regular business hours (EST) at (705)-719-6361.
-
Page 3: Technical Specifications
Amp’s RMS Power at 2Ω: 50 Watts x 4 Channels mesh grill using the 3 factory screws on the inside of the fairing. On the Hogtunes grill, you will see two holes and one “keyhole” where the screws go Frequency Response: 40hz - 25khz through and into the fairing. -
Page 4: Warranty Information
Please Record Your Amps Serial # Here_________________________ for GPS Antenna if your Hogtunes speakers are warranted for a period of 20 years. The NCA 450-RM bike came equipped with Amplifier is warranted for 3 years from original purchase date. Proof of this feature. - Page 5 At this point, all audio connections for this system are made. Attach the amps red wire you can read the Hogtunes logo on top of the amp. Re-install the amp to the plate to the positive (+) battery terminal, and the amps black wire to the negative (-) battery using the four screws removed earlier.
- Page 6 You can now bring the factory lower front panel to a work bench and remove the Step #8: Take the Hogtunes front panel and while holding it close the lower, snap torx screw that holds the vent adjuster and arm to the factory panel. Using the the arm for the vent back into place on the pivot pin first and then press the front same screw, install the vent adjuster and arm into the Hogtunes main lower panel.
Need help?
Do you have a question about the Limited-RM 362F-RM and is the answer not in the manual?
Questions and answers