Changing Settings / Programming; Programming; Language - Siemens TK 68 series Operating Instructions Manual

Changing settings / programming

Programming

Sprache
deutsch

Language

Sprache
deutsch
36
The appliance has been set ex works so that coffee can be
brewed without any additional programming.
These basic settings can be changed with the function
buttons under display 3.
< Selection button
% Access to programming mode / Save settings
Terminate programming
&
> Selection button
Warning
Do not switch off the appliance during programming.
Otherwise changes will not be accepted.
The appliance must be switched on before the standard
settings can be changed.
The following settings can be changed:
- Language
- Water hardness
- Filter
- Temperature
- Current time
- Timer function
- Energy saving mode
Factory settings have a grey background in this chapter
see example opposite.
To change the display to the desired language:
q Hold down button
%
q Press button
q Select the desired language with < or >.
%
q Press button
q Press the & button. Back to standby.
%
on display 3 for at least 3 seconds.
until the display flashes.
to save the setting.