Siemens TK 68 series Operating Instructions Manual page 32

UNIT IS
HEATING
UNIT IS
RINSING
Display 3
Display 3 indicates the settings, the processes which are
running and any messages issued by the appliance.
The appliance has been programmed ex works with standard
settings for optimum operation. These settings can be
changed see chapter Changing settings / programming".
Button ) 4
The appliance is switched on or set to standby mode with
button ) 4.
When button ) 4 is pressed, the appliance heats up and is
then rinsed. The illuminated ring on button ) 4 flashes during
this process.
The appliance is not rinsed if:
- the appliance was still warm when switched on or
- coffee was not discharged before the appliance was
switched to standby" mode.
Heating and washing processes are displayed.
Warning
When the appliance has been switched to standby mode,
steam is discharged through the tray 25.
While coffee is being brewing, button ) 4 is assigned a stop
function. The process is terminated by pressing button ) 4.
4 hours after the last coffee was brewed, a rinsing
i
process is automatically actuated and the appliance
switches to standby" mode. These settings can be
changed see chapter Changing settings /
programming".
cafe button 5
Espresso or coffee can be brewed by pressing the
2button 5. The green illuminated ring flashes
while espresso or coffee is being brewed.
If the 2 button 5 is pressed again, the coffee brewing
process is terminated.
31