Mode Switches; Connections To The Controller; Other Connections And Peripherals - Mitsubishi Electric Mac E Series Installation Manual

Installation

2.2.1 Mode Switches

All mode switches must be in OFF position during operator terminal use.
The mode switches should not be touched unless by qualified personell.

2.2.2 Connections to the Controller

For information about the cables to be used when connecting the operator terminal
to the controller, please refer to the help file for the driver in question.

2.2.3 Other Connections and Peripherals

Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Caution
When using a compact flash card, do not remove the card when the busy indicator is
illuminated.
Mitsubishi Electric, MA00776 2-3