How To Check The Spark Plug - Craftsman 536.270321 Operator's Manual

Hide thumbs Also See for 536.270321:
Table of Contents

Advertisement

HOW TO SERVICE THE AIR FILTER
NOTE: Never run the engine with the air filters (air cleaner
cartridge, pre-cleaner) removed. The air filters will help protect
the engine against wear. For the correct replacement filter, see
the parts list for the engine.
CAUTION: Do not use pressurized air or solvents to clean
cartridge. Pressurized air can damage cartridge; solvents will
dissolve cartridge.
If a filter is stamped WASHABLE, it can be washed with warm water
and mild soap.
IMPORTANT: Rinse in tap water with SCREEN side up allowing
dirt and debris to filter out. Leave filter to dry overnight before
reinstalling.

HOW TO CHECK THE SPARK PLUG

1.
Check the gap of the spark plug with a feeler gauge
(Figure 26). The correct gap is 0.030".
2.
For easy starting and good performance, replace the spark
plug every season or 100 hours of use.
400150
MAINTENANCE
Pull Handle
Rotate Handle
Remove Cover
Cartridge removal / installation
1.
Pull up on the handle for the air cleaner cover. Rotate the han-
dle toward the engine (Figure 25).
2.
Remove the cover
3.
Carefully lift the air cleaner cartridge, and the pre-cleaner, if
equipped, from the blower housing.
4.
To prevent debris from falling into the carburetor, carefully clean
the air cleaner base
5.
Install a new pre-cleaner, if equipped, and air cleaner car-
tridge firmly into the air cleaner base.
6.
Align the tabs on the cover with the slots on the blower hous-
ing and install the cover.
7.
To secure the cover, rotate the handle forward and push down.
Air Cleaner Cartridge
27
.
.
Pre-Cleaner
Slots
Feeler Gauge
0.030"
Spark Plug
Cover
Tabs
Figure 25
Figure 26

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents