Epson PowerLite Home Cinema 1440 User Manual page 134

Power light Status light
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Lamp light Temp light
Orange Off
Flashing Off
orange
Off Flashing
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Off
orange
134
Status and solution
Lamp has a problem
• Check to see if the lamp is burned
out, broken, or installed
incorrectly; reseat or replace the
lamp as necessary
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Replace the lamp soon to avoid
damage; do not continue using the
projector
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Auto Iris error; turn the projector off,
unplug it, and contact Epson for
help
Power error; turn the projector off,
unplug it, and contact Epson for
help
Internal projector error; turn the
projector off, unplug it, and contact
Epson for help