Installing The Wall Mount Kit; Wall Mount Kit Specifications (Vesa); Installing A Wall Mount - Samsung SyncMaster 460DR-2 User Manual

Installing a Wall Mount

Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer,
use the Holder-Ring.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket. Sam-
sung Electronics is not responsible for any damage to the product or injury to yourself or others if you
elect to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

Note
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the product on a ceiling or slanted wall, it may fall and result in severe personal injury.
Note
• Standard dimensions for wall mount kits are shown in
the table below.
• Samsung wall mount kits contain a detailed installa-
tion manual and all parts necessary for assembly are
provided.
• Do not use screws that do not comply with the VESA
standard screw specifications.
• Do not use screws that are longer than the standard
length or do not comply with the VESA standard
screw specifications. Screws that are too long may
cause damage to the inside of the product.
• For wall mounts that do not comply with the VESA
standard screw specifications, the length of the screws
may differ depending on the wall mount specifica-
tions.
• Do not fasten the screws too firmly. This may damage
the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds
of accidents.
• Samsung is not liable for product damage or personal
injury when a non-VESA or non-specified wall mount
Introduction