Remote Control - Mitsubishi Electric HC3000 User Manual

Preparing your projector (continue)
Bottom side

Remote control

ON
1
2
HDMI
COMPUTER
3
PC
4
5
MENU
6
M1
7
CONTRAST
8
CNT
9
GAMMA
AUTO POSITION
10
A.P.
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears. Ad-
just the picture quality by pressing the
the IMAGE menu. (See page 24.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ............ Adjust the contrast of the projected image.
SHARPNESS (SHARPNESS) ......... Adjust the sharpness of the projected image.
GAMMA (GAMMA MODE) ............ Selects one of the preset gamma mode. Adjustment of USER mode is also
BRIGHTNESS (BRIGHTNESS) ...... Adjust the brightness of the projected image.
COLOR TEMP (COLOR TEMP.) ...... Selects one of the preset color temperatures. Color adjustment of USER mode is
EN-8
1
2
3
21
POWER OFF
20
COMPONENT
19
COMP VIDEO
18
S-VIDEO
17
ENTER
16
ASPECT
AV MEMORY
M2 M3
BRIGHTNESS COLOR TEMP
15
BRT C.T.
SHARPNESS
14
SHARP IRIS
13
KEYSTONE
BLANK KS
12
11
and
available. (Refer to page 28.)
also available. (Refer to page 28.)
1 Adjustment foot (Front)
2 Lamp cover
3 Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot
and it may cause burns.
1 ON ( I ) button
2 HDMI button
3 COMPUTER button
4 ENTER button
5 MENU button
6 AV MEMORY buttons
7 CONTRAST button*
8 SHARPNESS button*
9 GAMMA button*
10 AUTO POSITION button
11 BLANK button
12 KEYSTONE button
13 IRIS button
14 BRIGHTNESS button*
15 COLOR TEMP button*
16 ASPECT button
17 Direction buttons
18 S-VIDEO button
19 VIDEO button
20 OFF ( ) button
21 COMPONENT button
* : See below for the picture quality adjusting buttons.
Important:
• When you press any button on the remote control, the
buttons on the remote control are lit. Wait approx. 5
seconds after releasing the button to turn them off.
• The direction buttons are use for the keystone adjustment
and fi ne adjustment ( ,
buttons. The picture quality adjustment can be made alternatively in
buttons only).