Setup Menu; Netcommand Menu - Mitsubishi Electric WD-57732 Owner's Manual

62
Chapter 5. TV Menu Settings

Setup Menu

See chapter 3, "TV Setup," for use of the Setup menu.

NetCommand Menu

The features described in this section are available even if
you have not performed NetCommand setup. See chapter
3, "TV Setup," for options available for NetCommand-con-
trolled devices.
Review TV Connections
(no NetCommand setup required)
to highlight Review and press ENTER to
Press
display the Review screen (see figure 2).
Figure 2. The Review screen lists all TV connections.
IEEE 1394 inputs are listed separately on the right.
Input Name Menu
(no NetCommand setup required)
Use the Input Name menu to assign useful labels to the
TV inputs that appear in the Input Selection menu. See
figures 3 and 4. The current viewing device and any
unused inputs appear grayed out and unselectable in the
Input Name menu.
Icon for the Input Name menu
Figure 3. The Input Name menu and Icon Order menu are
accessible through the NetCommand menu.
Figure 4. Input Name menu
To rename an input
1. If you are currently watching the input you wish to
rename, first change to another input. To do so, press
INPUT to open the Input Selection menu, highlight a dif-
ferent input, and press ENTER.
2. With the Input Name menu displayed, press
move the highlight to the box for the input you wish to
rename.
3. Press to select from the following list.
Cable Box
Camcorder
DVD
DVD2
DVR (digital video
recorder, recordable DVD)
Only one VCR label is available, so If you have a
second VCR connected, leave the name as the default
name.
IMPORTANT
It is possible to use the same name for more
than one input. To avoid confusion, be sure
to use different names for each input.
Icon for the Icon Order menu
to
Game
HD Disc
Satellite
VCR