Choosing A Program Source; Channelview™ Channel Listings - Mitsubishi Electric WD-57732 Owner's Manual

Dlp high-definition television
Hide thumbs Also See for WD-57732:
Table of Contents

Advertisement

50
Chapter 4. TV Operation and Features

Choosing a Program Source

NOTE: If your only viewing sources are connected to the
ANT 1 and ANT 2 antenna jacks, you can switch
inputs without the Input Selection menu. Press
INPUT to switch between ANT 1 and ANT 2. To
verify which is the current source while watching
TV, press INFO to see the on-screen status display.
Selecting from Multiple Sources: The Input
Selection Menu
The Input Selection menu allows you to select an input to
watch on the TV. The current input appears as a gold-
colored icon.
Press INPUT on the TV's remote control to display the
1.
Input Selection menu (Figure 2).
2. To select a different input, press
remote control to move the highlight through icons in
the input section.
3. Press ENTER to switch to the device and close the menu.
More About the Input Selection Menu
To assign meaningful labels to the icons, such as
"VCR" or "DVD," see the "Input Name" section of
chapter 5, "TV Menu Settings."
To rearrange the icons, see the "Icon Order" section of
chapter 5, "TV Menu Settings."
To use with NetCommand-controlled devices, includ-
ing IEEE 1394/DTVLink devices, see additional infor-
mation in chapter 6, "NetCommand Operations."
Input Section
Figure 2. Input Selection menu. See chapter 6,
"NetCommand Functions," for use of the Audio section.
ChannelView™ Channel Listings
ChannelView provides listings, as sent by broadcast-
ers, for memorized channels on ANT 1 or ANT 2.
ChannelView is available
for an antenna input not assigned to the TV Guide
On Screen system.
When the TV Guide On Screen system is disabled.
Channels are marked with either a D for digital channels
or an A for analog channels. Digital channels are shown
with the major channel and sub-channels (or bitstreams).
Analog channel information is displayed as sent.
Note: If limited data is shown or no program data ap-
Using ChannelView
Feature
View listings while viewing
ANT 1 or ANT 2.
Scan through memorized
channels one by one.
Scan quickly through memo-
rized channels.
View detailed information for
on the TV's
digital channels.
Return to viewing basic list-
ings information
Figure 3. ChannelView screen, current programs. Use
to exchange displays for current and future programs.
Audio Section
Figure 4. ChannelView screen, future programs on the
selected channel (digital channels only)
pears, it is because the broadcaster is not sending
the information. This is not a defect of your TV.
IMPORTANT
To receive ChannelView updates: Set the
Energy Mode to Fast Power On and leave the
TV powered off for a while each day. If the TV
loses power, program listings will be lost until
the next update.
Instructions
Press GUIDE.
Press
or
.
Press PAGE
/
.
Press
or
to highlight
a channel and press
.
Press .

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-65732Wd-73732Wd-y57Wd-y65Wd-65732Wd-73732 ... Show all

Table of Contents