Standard Cable Box, Satellite Receiver, Or Other Device With S-Video; Wall Outlet Cable (No Cable Box) - Mitsubishi Electric WD-57732 Owner's Manual

Dlp high-definition television
Hide thumbs Also See for WD-57732:
Table of Contents

Advertisement

22
Chapter 2. TV Connections
Standard Cable Box, Satellite
Receiver, or Other Device with
S-Video
Required: S-Video cable and left/right analog stereo
audio cables.
1.
Connect the cable from the outside cable or satellite
service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver.
2. Connect an S-Video cable from VIDEO OUT on the
cable box or satellite receiver back panel to INPUT
S-VIDEO on the TV back panel.
3. Connect left (white) and right (red) audio cables from
AUDIO OUT on the cable box or satellite receiver to
INPUT/AUDIO LEFT and AUDIO RIGHT on the
TV back panel.
Note: Refer to the cable box or satellite receiver Owner's
Guide for cable or dish antenna connections to the
receiver.
������������������
���������
��
��
�������������
�������
��
�����
������������������
�����������������������������������
�����
�����������������������
������
�����������������������������
����
����������������������
������
������������������������
������
�����
�����
�����������
�����������
��������
����������
R
TM
Figure 2. Connecting a device with S-Video
����������
������������������
��������
���������
�������
�����
���
������������
������������
���������
��
���������
��
�����������
����
���������
�������
���
�����
��
����
����������������
��
�����
�����
����
����
������
�����
���
�����
�����
�����
����
������
�����
�����
����
��������

Wall Outlet Cable (no cable box)

(can be used with a CableCARD™)
It is very important to connect the incoming cable for your
primary viewing source to ANT 1/MAIN, especially for
CableCARD™ use.
1.
Connect the primary incoming coaxial lead cable to
ANT 1/MAIN on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to ANT 2/AUX.
3. If you have subscribed to a CableCARD™ service,
Insert the CableCARD into the CableCARD slot. The
top of the card must face in the direction indicated by
the CARD TOP arrow.
See chapter 1, "Television Overview," for additional
CableCARD information. Detailed TV Guide On Screen
information is in the separate User's Manual.
Figure 3. Wall Outlet Cable
�������
�����
������������������
�����������������������������������
�����
�����������������������
������
�����������������������������
����
����������������������
������
������������������������
������
�����
�����
�����������
�����������
�����������
�����������
��������
��������
����������
����������
R
TM
����������
����������
������������������
������������������
��������
��������
���������
�������
�����
���
���������
�����
����
������
�����
�����
����

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-65732Wd-73732Wd-y57Wd-y65Wd-65732Wd-73732 ... Show all

Table of Contents