How To Scan To A Computer; Before Scanning; Scanning A Document As A Pdf File Using Controlcenter4 (Windows ® ) - Brother DCP-T300 Basic User's Manual

6

How to scan to a computer

Before scanning

To use the machine as a scanner, install a scanner driver.
If the machine is on a network (DCP-T500W and DCP-T700W), configure it with a TCP/IP
address.
Install the scanner drivers. (See Quick Setup Guide: Install MFL-Pro Suite.)

 Configure the machine with a TCP/IP address if network scanning does not work (DCP-T500W
and DCP-T700W).
Scanning a document as a PDF file using
ControlCenter4 (Windows
ControlCenter4 is a software utility that lets you quickly and easily access the applications you use
most often. Using ControlCenter4 eliminates the need to manually launch specific applications.
(For more information, see Software and Network User's Guide.)
NOTE
• The screens on your PC may vary depending on your model.
• This section is based on using the Advanced Mode of ControlCenter4.
a
Load your document. (See How to load documents on page 20.)
b
Click the (ControlCenter4) icon in the task tray, and then click Open.
26
®
)
6
6
6