• This set can be assembled in the order shown below.
4-1.
ASSEMBLY FLOW
4-2. OPTICAL PICK-UP COMPLETE ASSY
4-3. GEAR (LOMINI) / (LOAD 1) ASSY
4-4. OPERATION CHECK
4-2.
OPTICAL PICK-UP COMPLETE ASSY
SECTION 4
ASSEMBLY
(Page 15)
(Page 16)
(Page 16)
1 Move the lever (LOCK 3A) in the direction of arrow A ,
and return it a little in the direction of arrow B
from the position where the chuck plate is moved
chuck plate
down to the lower limit.
shaft (A)
B
A
3 stop ring 2.0 (E type)
4 tension spring (DH)
2 optical pick-up complete assy
Note: Insert the shaft (A) first.
CDX-454RF/454XRF
15