Dtv Receiver With Component Video - Mitsubishi WD-52525 Owner's Manual

Mitsubishi projection television owner's guide
Table of Contents

Advertisement

DTV Connectors and Adaptors Connecting a DTV Receiver with
Component Video
DTV Connectors and Adaptors
Figure 11
The TV back panel has 5 RCA-type connectors for
the Input-DTV. The back panel of your external DTV
receiver may use RCA-type connectors or BNC-type
connectors. If your DTV receiver comes with BNC
type connections, you will need to purchase BNC to
RCA adaptors to connect the TV to the DTV receiver.
These adaptors should be available at most electronic
supply stores.
Adaptor
BNC to
Fitted to
RCA
BNC
Adaptor
Connector
Connection
Figure 11. DTV Connectors and Adaptors
IMPORTANT
See Appendix B for component video
signal compatibility information.
For digital audio connections, see your
DTV Receiver and A/V receiver Owner's
Guides.

DTV Receiver with Component Video

Figure 12
A coaxial splitter, RCA component video cables and audio
cables are required. These are not included with the TV.
1. Connect the outside antenna, cable or satellite to
ANT or SATELLITE IN on the DTV receiver (see your
DTV receiver's owner's guide for instructions and
cable compatibility).
2. Connect the incoming terrestrial antenna or cable
(not satellite) to ANT-1 on the TV back panel
(a coaxial splitter, available at most electronic
supply stores, may be required to complete this
installation).
3. Connect RCA-type cables from the YPrPb outputs
24
or
RCA
Connector
on the DTV receiver to Input-DTV on the TV back
panel, matching the correct connections:
DTV Receiver to TV Back panel
• Y to Y
• Pr to Pr
• Pb to Pb
4. Connect the L (left) and R (right) audio cables from
the DTV receiver to Input-DTV AUDIO on the TV
back panel.
Note: To utilize the benefits of a digital A/V
receiver, connect your DTV receiver's digital audio
out to a digital input on your digital A/V receiver.
TV back panel
Incoming
Antenna
or Cable
IEEE1394
INPUT/OUTPUT
PC
IR EMITTER
2.
VGA/SVGA/XGA/
NetCommand
R
720p
60 Hz
L
DVI
L
Analog Audio
R
R
ANT-2
PC-
AUX
AUDIO
DTV/
CABLE/
VHF/
UHF
HDMI
ANT-1
PC-
M-LINK
MAIN
INPUT
2.
M-LINK
CONTROL/
RS-232C
DIGITAL
AUDIO
CARD
TOP
DTV Receiver (with YPrPb connections)
3.
Figure 12. Connecting an External DTV Receiver with
Component Video Connections
AUDIO
AUDIO
MONITOR
VIDEO
S-VIDEO
R
R
L(MONO)
L(MONO)
OUTPUT
AUDIO 2
AUDIO/VIDEO 1
3.
INPUT-1
INPUT-2
COMPONENT-1
YPbPr (480i/480p/720p/1080i)
COMPONENT-2
YPbPr (480i/480p/720p/1080i)
INPUT-DTV
YPbPr / RGB HV
(480i/480p/720p/1080i)
w
Pr/R
Pb/B
Y/G
h
V
H
R
i
e
t
d
e
4.
White
4.
Red
IN FROM ANT
SATELLITE IN
or
1.
to antenna,
1.
cable or satellite

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-52725Wd-62725Wd-62525

Table of Contents