Download  Print this page

Replacing The Configuration Battery - Mitsubishi Electric APRICOT 340 Owner's Handbook Manual

Apricot 340 series.
Hide thumbs

Advertisement

I n s i d e t h e S y s t e m U n i t

Replacing the configuration battery

The computer keeps a record of its current hardware configuration
in a CMOS memory chip which is sustained by a small battery.
This battery has a life of up to 5 years. When the battery is
discharged the contents of the configuration memory will not be
maintained while the computer is turned off. If you find that you
have to reconfigure the computer every time you turn it on, the
XDA-4
battery is probably failing and needs to be replaced.
The battery is a 3 volt lithium type (CR2032 or equivalent) typically
used in calculators and other small, battery-powered electronic
items.
To replace the battery:
1.
2.
3.
4.
A/10
APRICOT 340 OWNER'S HANDBOOK
Turn off the computer and unplug all power cords.
Take suitable anti-static precautions and remove the system
unit cover.
Identify the battery holder from the following illustration.
Lift the front edge of the battery far enough to clear the base
of the holder, then slide the battery out.

Advertisement

Table of Contents

This manual is also suitable for:

Apricot vs340Apricot ms340Apricot ls340Apricot xen pc

Comments to this Manuals

Symbols: 0
Latest comments: