8
1. Television Overview
Front-Panel Indicators
•
STATUS
indicator. Off during normal TV
operation.
POWER/TIMER
•
indicator. Lit when TV is
powered on; flashes when TV is powered
off and the auto-on TV Timer is set.
•
IR Sensor
(Infrared Sensor). Detects infra-
red signals emitted by the remote control.
Off
Steady On
POWER Indicator
LED Color TV Condition
Standby condition.
None
TV is powered on.
Green
TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time.
Green
Green
1. TV just plugged into AC outlet.
2. AC just restored after power failure.
3. TV rebooting after System Reset
used.
4. TV rebooting after power fluc-
tuation or receiving abnormal
digital signals from a digital
channel or digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
STATUS Indicator
LED Color TV Condition
Normal TV on or standby condition.
None
TV may require service.
Red
STATUS
148 Series TVs
Slow Blinking
Fast Blinking
Additional Information
Normal operation.
Normal operation.
Wait approximately one minute for blinking to stop before turning
on. Normal operation.
Additional Information
Normal operation.
Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix F.
If the LED is still on, contact your dealer or a Mitsubishi
Authorized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.
POWER
POWER
246 Series TVs
IR Sensor
STATUS
IR Sensor